مصنوعات کی تفصیلات
مصنوعات کی تفصیلات

LB-40 Continuous Rebar Printer

1. Introduction

The LB-40 Continuous Rebar Printer is designed and manufactured according to GB/T 228.1-2010 "Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature." It is a dedicated device specifically for automatically marking equally spaced gauge points on the surface of rebar specimens before tensile testing. This equipment is used to subsequently measure the elongation after fracture of rebar on universal testing machines, serving as a critical step in evaluating the plastic performance of rebar. It is widely applied in laboratories and field inspections of construction, metallurgy, and quality inspection institutions. Suitable materials include hot-rolled plain rebar, hot-rolled ribbed rebar, structural steel, flat steel, steel pipes, and other metallic materials, with an applicable diameter range typically from Φ6mm to Φ40mm.

 

The continuous rebar printer can produce 30 or 40 marks per oscillation, with a spacing of 10mm and an error tolerance not exceeding 0.2mm. The full length is divided into 300mm and 400mm mark tips, made from round steel with ball bearings, and a hardness of no less than RC55 degrees.

 

2. Main Technical Parameters

Marking distance: 10mm

Operation method: Manual

Printing depth: 0.3mm

سوالات یا مشاورت

ہم جو کچھ بھی کرتے ہیں اس میں ہم بہترین کارکردگی کے لیے پرعزم ہیں اور آپ کے ساتھ کام کرنے کے منتظر ہیں!

جینان وانگٹبی انسٹرومنٹ اینڈ ایکوپمنٹ کمپنی، لمیٹڈ

رابطہ شخص: صوفیہ گو

ای میل: sophie@jnwtbte.com, wtbequipment@hotmail.com

ٹیلی فون: 86-18615632092/86-18306400718

پتہ: نمبر 4، ژاؤژوانگ انڈسٹریل پارک، شیزونگ ڈسٹرکٹ،

        جینان، شینڈونگ، چین

کاپی رائٹ ©️ 2026، جینان وانگٹبی انسٹرومنٹ اینڈ ایکوپمنٹ کمپنی، لمیٹڈ (اور اس سے وابستہ کمپنیاں جہاں قابل اطلاق ہوں۔ جملہ حقوق محفوظ ہیں۔

واٹس ایپ
وی‌چیٹ