10KN computerized iron ore pellet compression testing machine
10KN computerized iron ore pellet compression testing machine
10KN computerized iron ore pellet compression testing machine
10KN computerized iron ore pellet compression testing machine
10KN computerized iron ore pellet compression testing machine
10KN computerized iron ore pellet compression testing machine
10KN computerized iron ore pellet compression testing machine

10KN computerized iron ore pellet compression testing machine

Product details
Product Introduction

1. Introduction and application of testing machine

l  Adopting   precise auto control and data acquisition system to realize fully   digital adjustment to data acquisition and control process. It can test   max. bearing tensile, compression, tensile strength, deformation,   elongation and other technical specifications;

l  After   test, the above parameters can be calculated automatically through  main  controller according to the test parameters, which are set before  test  and meantime display the corresponding test results. All test  parameters  can be saved and inquired after test, also can be connected  with  printer to print test reports.

2. Introductions of test method

Definition

Crushing   strength: the applied maximum compressive load at which an iron ore   pellet is broken completely, and which is expressed as the mean value of   all measurements of test sample.

 

Taking of sample

The   test sample (test pieces) for determining the crushing strength shall   by obtained at random, for example by the use of a random selection   plate, on about 1kg of the sample for physical testing. The test sample shall be oven dried at 105±5℃ and cooled to room temperature before testing.

Number of test pieces (iron ore pellets)

Sixty or more test pieces, or as agreed upon between the interested parties, shall be tested for each sample.

Test procedure

Place   a test piece (single pellet) at the approximate centre of the   surface-hardened portion of the lower platen. Apply the load at a   constant rate between 10 and 20mm/min throughout the test period.

Record the maximum load, at which the test piece undergoes complete breakage, to at least one decimal place, in decanewtons.

Note:   complete breakage is ensured by continuing to apply the load until the   platen gap has closed to 50% of the average test piece size.

Clean the platens thoroughly before the next test piece(single pellet) is tested.

Repeat the procedure on the remaining test pieces.

3. Main technical specifications of testing machine:

No.

Inspection items

Technical specifications

1

Max. load

10KN

2

Precision class

Class 1

3

Measuring range of load

1%-100%FS

4

Relative error of indicating value

±1.0%

5

Min reading value of deformation

0.01mm

5

Resolution of test force

1/300000F.S (with constant resolution within the whole   stroke)

6

Adjusting range of control rate of load

0.005%-5%FS/s

7

Adjusting range of deformation rate

0.005-5%FS/s

8

Control precision of deformation rate

When rate<0.05%FS/s, the precision is within ±1% of   setting value;

When rate ≥0.005%FS/s, the precision is within ±0.5% of   setting value

9

Adjusting range of displacement rate

0.01-500mm/min

10

Control precision of displacement rate

Within 0.2% of setting value

11

Effective test span

360mm

12

Effective compression space

400mm

13

Control mode

Computer

14

Power supply

220V, 50Hz, 400W

15

Dimension of main machine

410x660x820mm

16

Weight of main machine

80kg

Questions or Consulting

We are committed to excellence in everything we do and look forward to working with you!

Jinan Wangtebei Instrument & Equipment Co.,Ltd

Contact Person: Sophie Guo

E-mail:sophie@jnwtbte.com,wtbequipment@hotmail.com

Tel: 86-18615632092/86-18306400718

Add: NO.4,Zhaozhuang Industrial Park, Shizhong District,

        Jinan, Shandong, China

Copyright ©️ 2026, Jinan Wangtebei Instrument and Equipment Co.,Ltd(and its affiliates as applicable). All Rights Reserved.

WhatsApp
WeChat