LB-40 Continuous Rebar Printer
LB-40 Continuous Rebar Printer
LB-40 Continuous Rebar Printer
LB-40 Continuous Rebar Printer
LB-40 Continuous Rebar Printer

LB-40 Continuous Rebar Printer

EXW
جزئیات محصول
معرفی محصول

LB-40 Continuous Rebar Printer

1. Introduction

The LB-40 Continuous Rebar Printer is designed and manufactured according to GB/T 228.1-2010 "Metallic Materials—Tensile Testing—Part 1: Method of Test at Room Temperature." It is a dedicated device specifically for automatically marking equally spaced gauge points on the surface of rebar specimens before tensile testing. This equipment is used to subsequently measure the elongation after fracture of rebar on universal testing machines, serving as a critical step in evaluating the plastic performance of rebar. It is widely applied in laboratories and field inspections of construction, metallurgy, and quality inspection institutions. Suitable materials include hot-rolled plain rebar, hot-rolled ribbed rebar, structural steel, flat steel, steel pipes, and other metallic materials, with an applicable diameter range typically from Φ6mm to Φ40mm.

 

The continuous rebar printer can produce 30 or 40 marks per oscillation, with a spacing of 10mm and an error tolerance not exceeding 0.2mm. The full length is divided into 300mm and 400mm mark tips, made from round steel with ball bearings, and a hardness of no less than RC55 degrees.

 

2. Main Technical Parameters

Marking distance: 10mm

Operation method: Manual

Printing depth: 0.3mm

سوالات یا مشاوره

ما به تعالی در هر کاری که انجام می‌دهیم متعهد هستیم و مشتاقانه منتظر همکاری با شما هستیم!

شرکت فناوری و تجهیزات جینان وانگ‌تِه‌بِی

شخص تماس: سوفی گو

ایمیل:sophie@jnwtbte.com,wtbequipment@hotmail.com

تلفن: 86-18615632092/86-18306400718

آدرس: شماره 4، پارک صنعتی ژائوژوانگ، منطقه شیزهونگ،

        جینان، شاندونگ، چین

حق چاپ © 2026، شرکت فناوری و تجهیزات جینان وانگ‌تِه‌بِی (و شرکت‌های وابسته آن در صورت لزوم). کلیه حقوق محفوظ است.

واتس‌اپ
وی‌چت